Tips and Guide on How To Change Laminator Film In 2022

Guide on How To Change Laminator Film  – Laminators use a lamination film to produce laminated prints. And when the machine heats the lamination film so that it melts and bonds to the print in seconds.

When the film cools down, it becomes permanently adhered to the print. There are two types of lamination films: one-sided and two-sided.

One-sided lamination films are used for documents that need only one-sided protection while two-sided provides protection on both sides of your document or photo without any need for holes or pockets.

The lifespan of a lamination film depends on how often it’s used, but generally, they last up to six months with regular use. Here are tips on how to change your laminator film when it starts acting funny.

Let’s Get Started!

Tips and Guide on How To Change Laminator Film In 2022

Laminator film can become damaged over time and must be replaced periodically for optimum performance. This blog post will show you how to change the laminator film on your machine for the best results.

1. Preparing your Machine

To make changing your lamination film easy and fast, start by cleaning your machine’s glass and heat shrink. Your lamination film may also have holes and little pockets. This means that the paper needs to be sliced or re-cut.

Use a chisel to cut the hole or pocket off of the film if you’re using a two-sided lamination film.

Lamination film isn’t super complicated, but like all processes, mistakes can happen. For some reason, I find it easiest to actually hold a tiny knife in my hand while I manipulate the material to make a hole in the film. Then I rip the plastic film off of the paper.

There are a few ways to change your lamination film. It’s easier to do this if your lamination film is on the edge of your film.

2. Checking the film

Before any damage is done, you need to check the film quality, color, and position on the frame of the laminator.

Make sure that your lamination film has the correct thickness so that it’s durable enough to protect the surface of your print.

Once you’re happy with the film thickness and color, you’ll need to check the location of the film by removing it from the lamination machine and checking the location on the frame.

If the film has been mounted upside down on the laminator, make sure that you flip it over, so that you see the lamination film in the same place that it was when the lamination film was installed.

3. Removing the old film

First of all, note that most laminators have an insert button on the top so you can eject the film without pulling the lamination film off of the document. Here are the three laminator models we recommend for a budget or moderate user.

Also, take a look at this guide to changing the lamination film on an HP Officejet Pro 7730.

Remove the film to view the film holder. See the white color around the opening? That’s steam from your laminating film. If you see no signs of steam, make sure that the laminating film is well sealed from humidity.

Do not spray adhesive on your lamination film until you get a copy of the adhesive packet, because you could damage the seal. Remove the film from the metal backing.

4. Adding a new Film

Unlike rolling in rolls, laminators don’t need you to put the film into the carrier and pull it out. So, before you head to the photo store, ask to see the films they use. Most of them use Eastmancolor Laminating Film, so check out what kind of film your laminator uses before you head out.

When you get home, take the film out of the carrier and drop it into the top drawer of your laminator. After you cut the film to size, lay it down and slide the carrier into the machine. After you do this, there will be a slot for the carrier to slide into on the bottom.

If you’re using a laminator with no film tray, you’ll see no carrier tray, you need to make the films come out on the sides. Most laminators with a tray have a catch that holds the film in place.

5. Checking your machine

It’s important to check your lamination film periodically to ensure it’s still in good condition and that it isn’t breaking.

You can do this by turning your machine off, cleaning it with a brush and cleaning solution, checking for corrosion, etc.

What To Do If There is a Tear in the Film?

Remove the paper from the film and leave it to rest for about 15 minutes. After 15 minutes, carefully take out the film from the machine by sliding it from the holder.

Try to apply a fresh, new film over the affected area. If the film is stuck, clean the tear with the help of a damp cloth or a toothbrush.

If the film has come off easily, you know that it is the fault of the laminator. But if the film has torn off in the middle, and has no adhesive, then you can blame the printer, too.

What to do if the film is stuck to the surface of the printer

Although there’s no way of checking for how much film is stuck on the surface, there are some helpful indicators.

First, if you are cleaning the film to remove some marks, there will be some adhesive left on the surface.

What to do when the machine Doesn’t Work

The most common issues that people experience with their laminators are the machine not working, or the film becoming damaged. The most common way to fix this is to change the film when it starts to show signs of distress.

Be patient while you wait for your laminator to cool down. During this time, your laminator may take time to heat up to a proper temperature and will take some time to cool down. If your laminator is displaying signs of distress, leave it alone and wait until it has cooled down before you try to change the film.

First, make sure that you don’t have any laminating film in the freezer to avoid making a mess with ice while you wait for the film to cool down. When the film cools down, it will become very stiff and almost impossible to move without breaking the film.

Frequently Asked Questions and Answer

How to Choose the Right Laminator Films?

While choosing the right laminator films for your laminated prints, you need to think about 3 things.

  • Cost

It’s not cheap to buy a laminator. Of course, there are some cheap models out there, but they cost more. It’s better to invest in a high-quality laminator than to buy the least expensive one.

  • Operation and Maintenance

An easy way to make sure that the laminator is in good working order is to use it every day. If you don’t use your laminator, you won’t know whether it has any issues. If you do use your laminator, you can take care of those issues before they impact the quality of the prints or print life.

  • Quick Dry (cool) laminate films

Keep in mind that some laminators offer a quick-dry laminate film. It’s much faster than other types of laminators.

Safety Precautions When Using Laminator Film?

Lock the laminator before placing a print on it. Keep the laminator at an angle with the tab facing up or down to protect your pocket from damage. After you have printed a print, close the laminator and cover it with an opaque cover.

Secure the laminator with a lid. Laminators are hot when they print, and it is easy to burn fingers touching the hot laminator. Laminator lids are heavy and need to be securely locked. It is important to lock the lid because the laminator films should be attached to the print, and one hand cannot unscrew the lid. Also, do not be afraid to try your laminator and confirm if it is secure before pressing print.

How Can I Clean and Maintain Laminator?

So how do you clean your laminator? When you purchase your laminator, it comes with a kit containing a cleaning cloth, a cover for the adhesive film, and a cleaning solvent.

Keep in mind that laminators are usually located away from most household appliances and are not hooked up to the electric supply. So make sure to cover the area that you want to clean with a damp rag.

And never use a metal blade or pin or a sponge on the laminator as these will scratch the film and cause damage to it. Use a soft cloth and clean the areas that you cannot reach with a damp or damp mop.

The main part of the machine is covered in several different layers of material to provide durability and resistance. The film must be treated carefully so it doesn’t warp and cause damage.


Changing your laminator film isn’t difficult, but there are a few things to keep in mind. If the film begins to turn gray, for instance, don’t continue printing with it. You have to clean it.

Let it air-dry thoroughly before reinserting it into the laminator. This is because air drying doesn’t damage the lamination film.

But if it does, you’ll want to take the laminator apart, unscrew the caps, clean the screen and clean the laminator clean.

Also, once you clean and install the film, avoid microwaving the laminator because it might cause the coating on the film to melt.

Shop for Laminators

Leave a Comment